Picture Name


How to avoid failure during the use of rubber tracks?

Rubber track is prone to failure in the process of driving, transportation and construction, which brings a lot of inconvenience to normal production. So how to do preventive measures, letrubber trackCan it be used for longer?

1. The rubber track shall be carefully checked before use. First, it shall be turned for a week to check whether there is any abnormal situation. After confirmation, it shall be officially used and the rubber track chassis shall be kept clean.

2. It is strictly forbidden to drive the engineering vehicle equipped with rubber track on the ramp, otherwise the rubber track chassis parts will be damaged or fall off.

3. Try to avoid contact with organic solvents such as acid and alkali and oils. Once you encounter these substances, you should wipe them clean immediately before continuing to drive.

4. Always check whether the fastening points of the rubber track are loose. If the fastening points are loose due to vibration, stop filling grease first.

5. In order to prolong the life of the rubber track, the rubber track chassis should be installed on the horizontal ground and fixed with support pads. The rubber track must be removed and put into special equipment for each change of position.


  6.rubber trackOverload operation is strictly prohibited to prevent oil burning or overheating of the machine parts. Do not stop immediately after use for inspection.

7. The installation of the track should be carried out in a well-ventilated, dry and waterproof place indoors. It should not be used in a wet or greasy place. Special measures must be taken to prevent skids or protect chains to reduce wear when it is windy or snowy.

8. Before the installation of rubber track, soil and debris must be removed and the concave and convex parts must be smoothed. When placing, first apply butter to the preset groove on the rubber crawler chassis, then insert the screw into the channel, and then tighten the bolt with a wrench.

9. When installing the rubber track, keep the body perpendicular to the foundation surface, and pay attention to avoid damaging the main stress parts.

10. Adjustmentrubber trackPlease remember to rotate gradually when tightening the amplitude, I .e. press half a circle once, and rotate a few more circles when you feel obviously strenuous.

11. Always check whether the components of the hydraulic system are connected firmly, especially the sealing performance and lubrication of the valve core. If a leak is found, it should be eliminated immediately and replaced with a new one.

12. After the work is completed, cut off the power supply before leaving, long-term storage needs to be coated with lubricating maintenance oil.

Related News

Rubber track is a kind of equipment that makes the machine more flexible

May 11,2023

Rubber tracks are a kind of transportation equipment based on rubber tires. They can provide machines with more flexible operation capabilities and can better adapt to changes in terrain, such as changes in slope and road surface. The rubber track has good wear resistance, tear resistance and oil resistance, which can effectively protect the traveling surface, improve the traveling quality, and effectively reduce the traveling noise of vehicles and mechanical equipment. In addition, the rubber chain belt is light in weight, which can effectively reduce the load of vehicles and mechanical equipment and improve travel efficiency.

What is the elasticity and impact resistance of rubber tracks?

May 11,2023

Rubber track is a kind of building material, made of rubber belt, the two structural parts fixed together, that is, rubber track all the elastic and impact resistance of the combination. Rubber track is a transmission device used for vehicles and mechanical equipment to travel and transfer loads. Because it is made of rubber material and has abrasion resistance, tear resistance and oil resistance, it has been widely used.

What do you need to pay attention to during the use of rubber tracks?

May 11,2023

Rubber track is a kind of conveyor belt made of rubber technology, which can transport objects to the designated place. It is made of rubber, has anti-aging and wear resistance, can resist harsh environmental conditions, and has good corrosion resistance in special working environment. Rubber track, also known as rubber belt transmission, is a kind of coupling device that transmits mechanical energy to the surface of a moving object, and then pulls or pushes the moving object. It is an important product in the development history of transmission machinery, and is widely used in all walks of life. Its appearance has changed the development trend of transmission machinery, and it is an important part of transmission machinery.

Detailed explanation of the use of rubber block?

Feb 08,2023

The application range of rubber block is very wide, we must know the use of rubber block before use. If you are interested in this topic, then take a look at it together, hoping to help some relevant people.