Picture Name

News

How to maintain the rubber track used by the excavator?


How to maintain the rubber track used by the excavator?

1. During transportation and storage,rubber trackIt should be kept clean, avoid direct sunlight, rain and snow, prevent contact with acids, alkalis, oils, organic solvents and other substances, which may affect the quality of rubber, and stay away from the heating device 1 meter.

2. During storage, the temperature in the warehouse should be kept between -15 and 40, and the relative humidity should be kept between 50-80%.

3. When stored,rubber trackIt must be placed in rolls, not folded, and turned over once a quarter when placed.

4. The running speed of the rubber track should not be greater than 5.0 m/s. When conveying materials with large size and large wear, and when using a fixed plow discharge device, low speed should be used as much as possible. Exceeding the specified speed will affect the service life of the tape.


挖掘机使用的橡胶履带如何保养?


5. According to the design provisions of the conveyor, the relationship between the diameter of the conveyor drive roller and the cloth layer of the conveyor belt, the matching of the drive roller to the roller and the requirements for the groove angle of the roller should be reasonably selected.

6. In order to reduce the impact and wear of materials on the belt, the belt receiving section should shorten the roller spacing and take buffer measures. In order to prevent the tape from being scratched, the contact parts of the scraper cleaning device and the unloading device and the tape should be rubber plates with appropriate hardness, and the tape head with cloth layer should not be used.

  7.rubber trackIn the use of the process should pay attention to the following matters:

Avoid the roller being covered by materials, resulting in invalid rotation, prevent leakage of materials from getting stuck between the roller and the adhesive tape, pay attention to the lubrication of moving parts, but do not grease the conveyor belt, try to avoid starting with load, and take timely measures when the belt deviates. Correct, now the local damage of the adhesive tape should be repaired in time to avoid expansion, prevent the adhesive tape from being blocked by frames, pillars or block materials, and prevent the adhesive tape from breaking and tearing.

Related News

Rubber track is a kind of equipment that makes the machine more flexible

May 11,2023

Rubber tracks are a kind of transportation equipment based on rubber tires. They can provide machines with more flexible operation capabilities and can better adapt to changes in terrain, such as changes in slope and road surface. The rubber track has good wear resistance, tear resistance and oil resistance, which can effectively protect the traveling surface, improve the traveling quality, and effectively reduce the traveling noise of vehicles and mechanical equipment. In addition, the rubber chain belt is light in weight, which can effectively reduce the load of vehicles and mechanical equipment and improve travel efficiency.

What is the elasticity and impact resistance of rubber tracks?

May 11,2023

Rubber track is a kind of building material, made of rubber belt, the two structural parts fixed together, that is, rubber track all the elastic and impact resistance of the combination. Rubber track is a transmission device used for vehicles and mechanical equipment to travel and transfer loads. Because it is made of rubber material and has abrasion resistance, tear resistance and oil resistance, it has been widely used.

What do you need to pay attention to during the use of rubber tracks?

May 11,2023

Rubber track is a kind of conveyor belt made of rubber technology, which can transport objects to the designated place. It is made of rubber, has anti-aging and wear resistance, can resist harsh environmental conditions, and has good corrosion resistance in special working environment. Rubber track, also known as rubber belt transmission, is a kind of coupling device that transmits mechanical energy to the surface of a moving object, and then pulls or pushes the moving object. It is an important product in the development history of transmission machinery, and is widely used in all walks of life. Its appearance has changed the development trend of transmission machinery, and it is an important part of transmission machinery.

Detailed explanation of the use of rubber block?

Feb 08,2023

The application range of rubber block is very wide, we must know the use of rubber block before use. If you are interested in this topic, then take a look at it together, hoping to help some relevant people.