Picture Name


Introduction to the advantages of rubber track chassis

The ground area of the crawler chassis is larger than that of the wheel type, so the pressure is small when landing; in addition, it has strong adhesion to the road surface and can provide greater driving force. The crawler chassis wraps the circular circulating track on the outside of the driving wheel and a series of rollers, so that the wheels do not directly contact the ground, but act on the ground through the circulating track, and then drive the crawler to realize the movement of the wheels on the track through the driving wheel. At the same time of relative rolling, repeatedly laying forward on the ground, so as to drive the chassis movement.

Crawler chassis is mainly suitable for what occasions:

Crawler chassis is mainly used for special occasions, such as tanks, armored vehicles, etc., so what are their advantages?, low noise, low vibration, ride comfort and other advantages, especially suitable for high-speed transfer occasions, to achieve full road traffic performance. Advanced and reliable electrical instrumentation and machine condition monitoring systems provide a reliable guarantee for the correct operation of the drive.

In addition to being used in the military, it is also widely used in large machinery, such as excavators and other tracked vehicles, with the same function and effect. In addition, the tracked chassis is generally a heavy armored vehicle or tank, which consumes a lot of fuel, relies heavily on logistics, and has better passing performance than wheeled vehicles. High requirements for air transport, carried by heavy transport aircraft.

The crawler chassis is more suitable for small light industry and small construction machinery industry. Engineering drilling rig crawler chassis light industry is generally within one to four tons of agricultural machinery. The construction machinery industry uses small-scale drilling industry Hubei miniature crawler chassis.

The choice of operating environment is roughly as follows:

(1) The use temperature is generally between -25~55 ℃.

(2) Chemicals, engine oil, and salt in sea water will accelerate the aging of the track. The track should be cleaned after use in such an environment.

(3) The road surface with sharp protrusions (such as steel bars, stones, etc.) will cause trauma to the rubber track.

(4) Road edge stones, rutting or uneven road surface will cause cracks in the tread pattern on the ground side of the track edge. If the cracks do not damage the steel cord, it can continue to be used.

(5) The gravel road and the gravel road will cause early wear on the rubber surface in contact with the load-bearing wheel and form small cracks. In severe cases, moisture intrudes, causing the core iron to fall off and the steel wire to break.

Increase the service life of the crawler chassis

1. It is recommended to carry out maintenance according to the maintenance plan;

2, before entering the factory, clean up the machinery and equipment, let the machine enter the factory is clean;

3. To go through the formalities before entering the insurance, professional personnel are required to identify the equipment, check the status of the equipment and check the technical status, so as to write down the items that need maintenance and make the corresponding probability.

4. Make docking safe and reliable;

5. According to the maintenance items, special people should be arranged for maintenance. The tools should be carefully selected. When disassembling the equipment, the disassembled parts should be put into a special basin and cleaned before use.

Related News

Rubber track is a kind of equipment that makes the machine more flexible

May 11,2023

Rubber tracks are a kind of transportation equipment based on rubber tires. They can provide machines with more flexible operation capabilities and can better adapt to changes in terrain, such as changes in slope and road surface. The rubber track has good wear resistance, tear resistance and oil resistance, which can effectively protect the traveling surface, improve the traveling quality, and effectively reduce the traveling noise of vehicles and mechanical equipment. In addition, the rubber chain belt is light in weight, which can effectively reduce the load of vehicles and mechanical equipment and improve travel efficiency.

What is the elasticity and impact resistance of rubber tracks?

May 11,2023

Rubber track is a kind of building material, made of rubber belt, the two structural parts fixed together, that is, rubber track all the elastic and impact resistance of the combination. Rubber track is a transmission device used for vehicles and mechanical equipment to travel and transfer loads. Because it is made of rubber material and has abrasion resistance, tear resistance and oil resistance, it has been widely used.

What do you need to pay attention to during the use of rubber tracks?

May 11,2023

Rubber track is a kind of conveyor belt made of rubber technology, which can transport objects to the designated place. It is made of rubber, has anti-aging and wear resistance, can resist harsh environmental conditions, and has good corrosion resistance in special working environment. Rubber track, also known as rubber belt transmission, is a kind of coupling device that transmits mechanical energy to the surface of a moving object, and then pulls or pushes the moving object. It is an important product in the development history of transmission machinery, and is widely used in all walks of life. Its appearance has changed the development trend of transmission machinery, and it is an important part of transmission machinery.

Detailed explanation of the use of rubber block?

Feb 08,2023

The application range of rubber block is very wide, we must know the use of rubber block before use. If you are interested in this topic, then take a look at it together, hoping to help some relevant people.